We are often asked how we install a wrist tether into the handle of a racquetball racquet. It can be a bit fussy, especially on certain racquetball racquets like E-Force racquets where there is a tiny opening for the tether. Here are a couple of tips that will help you get that tether in, out and tied off in no time.
Use a thin tether
Some wrist tethers are very thick. If you begin with a narrower tether it will make the process easier. We like the E-Force Skinny Wrist Tether. Pick up a couple and keep them on hand so you have them when you need to change yours out.
To install the tether into your racquet handle
Unfold a paperclip until it is straight; then bend one end into a tiny U shape. Insert the end of the tether without the slip knot into one side of the opening in the butt cap. Use an awl or another narrow tool to poke the tether down into the hole a little ways. Insert the bent end of the paperclip into the opposite side to "hook" the tether and gently pull it out the opposite side. Pull roughly two inches through and tie it off using a "self-tightening" knot. Finally, we like to tuck the tail end back down into the hole for a finished look.
Subscribe to:
Post Comments (Atom)
ReplyDeleteThe Best Racquetball Racquet is a fine and very enjoyable sport. Any kind of peoples like this game very much.Young and old both type human enjoy this racquetball racquet sport.
Best Racquetball Racquet
Very efficiently written information. It will be beneficial to anybody who utilizes it, including me. Keep up the good work. For sure i will check out more posts. This site seems to get a good amount of visitors. racquetball racquet
ReplyDelete